TexasHVACExam

⚖️ Texas Laws and Rules

What this topic covers

The Texas Laws and Rules subject area of the PSI bulletin, with its references: Texas Occupations Code Chapter 1302, 16 TAC Chapter 75 and OSHA recordkeeping in 29 CFR 1904. These are original practice notes, not materials of the TDLR or PSI, based on the texts in force on January 1, 2027. The exam is open book: know which section answers the question and where to find it, rather than memorizing every figure.

License classes and endorsements

Companies and licensed employees

Insurance

Continuing education and technicians

OSHA recordkeeping and reporting

Take the free test · full question bank and mock exams with a subscription

Sample questions (5)

1. Cedar Ridge Cooling holds a Class B contractor license endorsed only for commercial refrigeration and process cooling or heating. A customer asks it to install a 10-ton rooftop air conditioning system to cool an office. May the company take this job under Texas Occupations Code §1302.254?

  1. Allowed, because 10 tons is within the Class B capacity limit
  2. Not allowed, because a 10-ton system needs a Class A license
  3. Not allowed without an environmental air conditioning endorsement
  4. Allowed, if a registered technician performs the installation

Comfort cooling for an office is environmental air conditioning as defined in Texas Occupations Code §1302.002(11), and §1302.254(d) bars a license holder from any type of air conditioning and refrigeration contracting for which the license is not endorsed. The 10-ton system is within the 25-ton Class B limit of §1302.253(c), so no Class A license is needed, but capacity does not replace the endorsement, and a registered technician cannot supply an endorsement the license lacks.

2. What capacity limits apply to a Class B air conditioning and refrigeration contractor license under Texas Occupations Code §1302.253(c)?

  1. Not more than 15 tons cooling or 1.0 million Btu/h heating
  2. Not more than 25 tons cooling or 1.5 million Btu/h heating
  3. Not more than 25 tons cooling or 2.5 million Btu/h heating
  4. Not more than 50 tons cooling or 3.0 million Btu/h heating

Texas Occupations Code §1302.253(c) limits a Class B license to a system, a product, or equipment of not more than 25 tons cooling capacity or 1.5 million British thermal units per hour output heating capacity. The 15-ton and 1.0 million pair understates both limits, 2.5 million overstates the heating limit, and the 50-ton and 3.0 million pair doubles both; a Class A license, by contrast, has no size limit under §1302.253(b).

3. What minimum aggregate commercial liability coverage must a Class B licensee maintain under 16 TAC §75.40(b)?

  1. $100,000
  2. $200,000
  3. $300,000
  4. $600,000

16 TAC §75.40(b)(2) requires a Class B licensee to carry at least $200,000 aggregate. The $100,000 figure is the Class B per-occurrence minimum in §75.40(b)(1), $300,000 is the Class A per-occurrence minimum, and $600,000 is the Class A aggregate under §75.40(a)(2).

4. Brazos Valley Air has employed no license holder at its permanent office since March. In April it signed a contract to replace a customer's heating system, and the work was completed in May. What is the company's position under Texas Occupations Code §1302.252?

  1. It may collect the full fee because the work was done correctly
  2. It may recover the cost of parts and materials supplied
  3. It may collect the fee if a registered technician did the work
  4. It may not collect a fee or otherwise enforce the contract

Texas Occupations Code §1302.252(a) requires a company to employ a license holder full time in each permanent office. Under §1302.252(b), a company without one when the contract is signed and when the services are performed may not collect a fee or otherwise enforce the contract. Correct workmanship does not cure the defect, the statute allows no partial recovery for parts and materials, and a registered technician does not satisfy the licensed-employee requirement.

5. How many continuing education hours must a contractor licensee complete to renew a license under 16 TAC §75.25(b)?

  1. Four hours, including one hour of Texas law and rules
  2. Six hours, including two hours of Texas law and rules
  3. Eight hours, including one hour of Texas law and rules
  4. Ten hours, including two hours of Texas law and rules

16 TAC §75.25(b) requires a licensee renewing a contractor license to complete eight hours of continuing education in department-approved courses, including one hour of instruction in Texas state law and rules that regulate the conduct of licensees. Four, six, and ten hours do not appear in the rule, and the two-hour figure in §75.25(g) is the credit a career and technology instructor may claim per academic semester, not a law and rules requirement.

Start free

TexasHVACExam · Topics · Exam guide · Sample questions